Rockin' Divas

Rockin’ Divas

This tut was written by me, Em Jay, on 5-10-10 with all rights reserved.  Please do not copy and paste it in any group, any website, or call it your own. You can link to it using a text link to my blog.

This tut is written using a PTU kit created by KiKeKa Kits called Rock On. The stores she currently sells at are listed on her blog here.  It was written using PSPX, but is adaptable to any version and is for people with a good working knowledge of PSP.

No outside supplies needed.

Open a new image 550 by 550, fill with white, select all, add new raster layer, c/p paper05 into selection.  Effects/Artistic effects/Chrome with these settings – Flaws 1, Brightness 100, Use original color is not checked, color white. Merge down.

Add new raster layer, set the selection tool to circle and make a circle about 260 by 260 in size. Open a paper of your choice, copy and paste into selection. While still selected add a new raster layer, open another paper of your choice and copy and paste into selection, select none. Position the two circles like in the sample image, add drop shadow to both circles.

Take the presets shapes tool and set the shape to rounded rectangle. Set the foreground color to black and background color to white. While holding the shift key, draw a frame about the size as the one in the sample image, convert to raster, duplicate. Take the magic wand and click inside one of the frames, Selection/modify/expand 2; add new raster layer and c/p another paper of your choice into selection, drag the layer below the frame.  Add new raster layer, c/p another paper into selection and drag this layer below the second frame.

Click on one of the frame layers, Select all/float, defloat; flood fill with a color from your tag, Effects/3D effects/Inner bevel with these settings – Bevel 2; Width 8; Image 16, 8, -10, 12; Light – Color white; 315, 30, 60. Repeat these steps on the second frame only using a different color from your image. Add a drop shadow to both of the frames.

Add new raster layer, using the selection tool set to rectangle make a selection around 475 by 65. Open paper18, c/p into selection. Add new raster layer and c/p paper02 into selection, select none.  Position these two rectangles as shown in the sample and drag them below the rounded square layers. Click on the Warp Brush tool and use these settings – Warp Mode contract, 32, 0, 100, 25, Edge Mode background. Distort the rectangles here and there as shown in the sample. Open Barbedwire, c/p as new layer, duplicate. Resize and position these wires over the warped rectangles, add a drop shadow on each one. C/P barbedwire02 as a new layer, add a drop shadow.

Open the rockon posers 1 and 8. Using the selection tool set to square, make a selection of the head of the posers, c/p as new image. Take one of the new images and c/p it as a new layer under one of the frames and resize and position with the deform tool, duplicate and drag above the frame layer.  Take the selection tool and make a selection of the bottom portion of the new layer and delete.  It should now look like it is actually coming out of the frame with the head on top of the frame.  Repeat these steps on the second frame only using the other poser.

Let’s decorate with some of the elements.  C/P staple02 as new image, duplicate.  Using the deform tool position, resize and rotate as needed and place them on either sides of the top warped rectangle.  C/P flower04 as new image and position on the top right of the tag. Open the drums and resize to 50%, c/p as new layer and position on the bottom right of the tag. Open hwingedheart01 and resize to 40%, c/p as new layer on the middle of the big drum, add a white drop shadow 1, 1, 85, 5.00. Open guitar01, resize to 50%, c/p as new layer, position and rotate with the deform tool. C/P tag01 as new layer and drag below the two instrument layers. Open microphone01, resize to 40%, flip and c/p it on the bottom overlapping the banner. Open charm01, resize to 40%, c/p as a new layer so it looks like it’s hanging from the barbed wire. Add a black drop shadow to each of the element layers except for the winged heart.

Open music02, select some notes using the rectangle selection tool, copy and paste as new image. Highlight the left circle layer, c/p these notes as new layer, position and resize if needed with the deform tool, add a white drop shadow using the same settings as above. Highlight the bottom background layer and c/p some notes as a new layer, move to the top left of the tag, add the white drop shadow. I also added more notes to the background layer under the drums.

Now it’s time to add your text, watermark and copyright information.  If you used the posers from the kit, the copyright should read ©KiKeKa Kits. Export as a jpeg and you’re done!

Hope you enjoyed the tut!

Feeling Blue

Feeling Blue

This tut was written by me, Em Jay, on 5-8-10 with all rights reserved.  Please do not copy and paste it in any group, any website, or call it your own. You can link to it using a text link to my blog.

This tut is written using a PTU kit created by Black Widow Creations called Angel’s Cry which can be purchased here at Underground Scraps.   It was written using PSPX, but is adaptable to any version and is for people with a good working knowledge of PSP.

Supplies needed: WSL_Mask283 which can be downloaded at weescotslass creations.  The links for her masks are on the right.

I used a poser which is ©medieval creations, http://medievilcreations.blogspot.com/.  It is a ftu image which can be downloaded here.  It’s under the Medi poser tubes 2 link and called Aleera2.

Let’s get started!

Open a new image 550 by 550, fill with white, select all, add new raster layer. Open a pattern from the kit called AngelCry1, c/p into selection on your tag, select none.  Apply WSL_Mask283 and merge group.

Add new raster layer. Highlight bottom layer, select all. Highlight top new layer and c/p Paper2 into selection.  Apply the same mask again, merge group. Resize this layer down to 75%. Effects/Texture effects/Texture Canvas fine, 25%, Image – 3, 7, 0, 0; Light – Color white, 115, 50, 30. Merge down.

C/P frame6 as new layer. Resize with deform tool if needed. C/P TearDrops1 as new layer resizing with the deform tool.  Drag this layer below the circle frame. Using the eraser, erase anything that is showing outside of the circle. Open the single TearDrop1 and resize to 60%. C/P as new layer and position it over one of the drop lines. Duplicate this teardrop so that you have one for each line of drops and position them up or down on those lines as in the sample image. Once all of the drops have been placed, merge them all down until all of the individual drops and the bottom teardrops layer are all on the same layer.

Open Flower3, resize to 25%, duplicate 4 times.  Arrange the flowers along the left side of the circle frame. Add a drop shadow to each flower layer.  Highlight the top flower layer and merge down 4 times.  Open the focus tube you chose to use and resize as needed.  I used the Medievil Creations poser named Aleera11 which is described and linked above. C/P is on the bottom of the circle frame.  Add a drop shadow. C/P Bow4 as a new layer. Resize, rotate and position the bow on the lower right of the circle frame.  Add a drop shadow. Open Sparkle3, resize to 50%.  C/P as new layer and duplicate about five or six times and just position them here and there around the outside of the frame. Merge all visible.

Now is the time to add your text, watermark and copyright information.  I used a font called 1 Snappy DNA. Export as a jpeg and you’re done!

Hope you enjoyed this tutorial.

Rieka

Rieka

This tut was written by me, Em Jay, on 5-5-10 with all rights reserved.  Please do not copy and paste it in any group, on any website, or call it your own. You can link to it using a text link to my blog.

This tut is written using a PTU kit created by Rieka_Rafita called RR_HappyMother’sDay_TaggerSize which can be purchased here at Wilma4Ever Store.   It was written using PSPX, but is adaptable to any version and is for people with a good working knowledge of PSP.

I used the beautiful artwork ©hellonlegs exclusive http://simplyelegant.yuku.com/directory. Please do not use her work unless you have permission to do so.

This tag illustrates the versatility of the kit despite its name. It can be used any time of the year.  Instead of a Mother’s Day tag, I chose to make a signature tag for the designer.

Let’s get started!  Open a new image 550 by 550, fill with white. Open Button3, resize to 60%, c/p as new layer. Go to Effects/texture effects/Mosaic-Antique and use these settings Grid Settings 60, 60, symmetric is checked; Mosaic settings 60, 4, 60; click ok. Duplicate this layer two times and position and resize the layers a bit with the deform tool to make a nice mosaic flower cluster that will serve as the background for the tag.  Once you like how you have it, highlight the top duplicated layer and merge down twice.

Open Frame2, resize to 60%, c/p as new layer.  Move the frame a bit up and to the left.  I then recolored the frame slightly using Adjust/Hue and Saturation/Hue, Saturation, Lightness with these settings,

Hue -15, Saturation 20, Lightness 0; click ok. Add a nice drop shadow.  Now you can add the focus tube of your choice and position it in the frame the way you like it.

Open Lock2, resize to 30%, c/p as new layer, rotate slightly to the left with the deform tool, position up on the top right of the frame, drag the layer below the frame. Open Pearls3, resize to 50%, c/p as a new layer, using the deform tool rotate slightly to the left and resize as needed to stretch across the bottom of the frame.  Open HighHeels3, resize to 20%, c/p as a new layer, duplicate. Highlight the original shoe layer, Image/Free rotate, direction right,  degrees free 110, rotate single layer around canvas center is checked, click ok. Add a drop shadow.  Highlight the top shoe layer, add a drop shadow, merge down. Position the shoes somewhere on the lower right of the tag. Open Perfumes2, resize to 12%, c/p as a new layer and move it somewhere on the bottom of the tag, add drop shadow. Open Key2, resize to 25%, c/p as new layer, rotate to the right and position somewhere on the bottom of the frame.  Open Butterfly4, resize to 12%, c/p as new layer and move it somewhere on the side flower border of the frame, duplicate, mirror and position on the right side of the tag where you like it.

Time to add the text.  Select a darker color from the image for the foreground and a light color from the image for the background. Change the fill properties of the background to gradient and select the foreground/background gradient on the top of the dropdown list. Anti-alias smooth, stroke width 2, create as vector. Choose your font.  I used a ptu font called AL Softhearted, size 100.  Type your text, position it where you want it, convert to raster. Select all, float, defloat, Effects/3D Effects/Inner Bevel with these settings: Bevel 2, Width 6, Image – 0, 3, 0, 20, Light – Color white, 315, 40, 50. Click ok. Add a drop shadow.

Add your watermark, copyright information and export as a jpeg.  You’re done!

Hope you enjoyed this tutorial!

Lizzy

Lizzy

This tut was written by me, Em Jay, on 5-3-10 with all rights reserved.  Please do not copy and paste it in any group or call it your own. You can link to it using a text link to my blog.

This tut is written using the PTU kit created by Rieneke Designs  called Lizzy which can be purchased at Heartbeatz Store.   It was written using PSPX, but is adaptable to any version and is for people with a good working knowledge of PSP.

No outside supplies needed except for your focus tube.  Please do you use the image in the sample tag unless you have permission to do so.  It is ©Omega http://omega88.deviantart.com/.  

Open a new image 600 by 550, fill with white. Click on the preset shape tool, create as vector and anti-alias are checked, select the ellipse shape. Open papers 6 and 8.  Set your foreground to pattern and select paper 8, then set your background to pattern and select paper 6. The line style is solid and width is 20. While holding the shift key, draw a circle using the sample image as a guide as to how big it should be, convert to raster.

C/P beads1 on new layer and move it around the top left of the canvas; duplicate/mirror and move this new layer to the top right; duplicate/flip and position this third layer somewhere on the bottom of the canvas. Highlight the top beads layer and merge down twice.  They should all be on one layer.  Drag this layer under the circle layer. C/P lizzy_raster1 as new layer, duplicate four times so you have five layers of this grid. Position them using your deform tool here and there around the circle, rotating some slightly to the right and left.  Highlight the top grid layer and merge down 4 times.  Drag this layer under the circle. C/P lizzy_deco4 as new layer, duplicate one time.  Move and position these two layers one on the bottom of the canvas and one on the right side.  Merge the top deco layer down. Drag this layer below the circle.

Open lizzy_stitch2 and resize to 60%, c/p as new layer and position it on the circle, resizing if needed with the deform tool.  Duplicate and slightly resize it again to fit inside of the first stitched circle, merge down. Add a drop shadow using these settings: 1,1,90, 1.00 color white. Add the same exact drop shadow a second time. Merge down. Highlight the circle layer and add a drop shadow, 2,2,80,5.00. Close the bottom white layer and merge visible.

You can add the focus tube you chose to work with now somewhere on the circle so you can start decorating the top layers of your tag.  This is how I did mine. Open ribbon1 and 2, resize to 60%. C/P as new layers, using deform tool to rotate and position each layer how you want it. Open rose2, resize to 50%, c/p as new layer, duplicate and position both flowers somewhere on the lower right. Open rose1, resize to 10%, c/p as new layer and position somewhere on top of the first two roses.  Feel free to duplicate this small rose as many times as you want and position where you want. Open string4, resize to 60%, c/p as new layer and position on the left side of the circle. I used the eraser tool, size set to 3 to erase a few areas of this heart doodle where the ribbon was to make it look like the ribbon was weaving over the doodle. Open butterfly1 and 2, resize to 60%, c/p as new layers, position/resize/rotate the way you like them. Now highlight each element layer and add a nice drop shadow.  Once you’ve done that, merge visible.

Crop all excess white from around the tag.  Then I resized my tag to no larger than 550 on the longest side just because I prefer a little bit smaller tag. Now is the time to add your text. Choose a font you like.  I used a font called Swingdancer. Set the foreground color to a purple from your image and the background to pattern and use paper8, width set to 2. Type your text, add a nice drop shadow.  Now add your watermark and copyright information and you’re done.

I hope you enjoyed this tutorial!

Misty River

Misty River

This tut was written by me, Em Jay, on 4-29-10 with all rights reserved.  Please do not copy and paste it in any group or call it your own. You can link to it using a text link to my blog.

This tut is written using a beautiful PTU kit created by Wilma4Ever  

 called Joy which can be purchased at Heartbeatz Store.   It was written using PSPX, but is adaptable to any version and is for people with a good working knowledge of PSP.

Supplies: Here

Filters: Flaming Pear Flood

Open a new image 600 by 600, flood fill with white. Select all, add new raster layer, c/p Joy_Paper1 into selection.  Apply a background mask of your choice.

C/P Joy_Frame5 as a new layer, add drop shadow with these settings, vertical/horizontal 1, opacity 85, blur 5; then add a second drop shadow using the same setting except change vertical/horizontal -1.

Highlight the mask layer, make a freehand selection around a part of the image starting below the center line and extending it so that it is slightly overlapping the frame on the left and bottom. Effects/user defines plugins/flaming pear/flood and use these settings View – 23,28,56,47; Waves - 53,52,71,82 and choose a dark shade of a blue from your image.  I used #096967;  Ripple - 90,100,83

Glue – normal, select none.

Highlight the mask layer again. Open Joy_Grass2, resize to 50%, c/p as new layer, duplicate. Using the deform tool, position both layers as seen in the sample image.  Now, we don’t want those straight bottom edges.  So, use the eraser tool with the default settings except change the size to 75 and opacity to 50. Highlighting the grass layers just erase a little of the bottom so that it looks like it’s blending in with the background. Then open Joy_Flower1, resize to 50%, c/p as new layer, duplicate twice.  Position these flower layers in the grass. I mirrored one of them.  Now drag all three flowers below the grass layers.

Open Joy_fishes and Joy_Critter1, resize both to 50%. Still having the mask layer highlighted, c/p both as new layers.  I used the selection tool on one of the fish, cut, pasted as new layer so that I could separate the fish and position them where I wanted them.  Add a nice drop shadow on the bee and fish.

Now close the frame layer and merge visible. We’ll now decorate over the frame.

Open all these images and resize to 50%,  Joy_Bow3, Joy_Flower3, Joy_Flower6, Joy_Stones, Joy_Branch3, Joy_String.  We will copy and paste them all as new layers.  Move the stones to the bottom of the frame.  I used the selection tool, edit/cut the lowest bottom stone and pasted it as another new layer. Place the orange flowers on the bottom right of the frame, duplicating twice, positioning them how you like them. Move the single stone that you cut off of the cluster to under the orange flowers. Move the string to the top part of the frame. Move the bow layer on top of the string. Move the yellow flower over the middle of the bow, duplicate twice, resize some more and position the little yellow flowers on the left of the frame. Move the branch to the right side of the frame, duplicate and resize the second one a bit.  Move both layers below the orange flowers to hide the bottom of the branches.  Now add a nice drop shadow on each of the element layers.

For my focus tube I used a beautiful cookie poser called SSLisa-Cookie-Candy Fae-butterscotch2, ©2008 LKDesigns http://sophisticatedscraps.blogspot.com/. I added it to the bottom left of the image, add a drop shadow.

Now it’s time to add our text. Choose a font of your choice. Reopen Joy_Paper1 and set your foreground/stroke to pattern and select the paper. Background color was taken from one of the little yellow flowers. Type the text on a vector, rotate it slightly to the right, add a drop shadow.  Move it to the top right of the image and drag it under the string.  Use the eraser to erase some of the string to make it look like it’s weaving through the letters.  Add watermark and copyright info and you’re done.

I hope you enjoyed this tutorial!

Lucky Bug

Lucky Bug

This tut was written by me, Em Jay, on 4-22-10 with all rights reserved.  Please do not copy and paste it in any group or call it your own. You can link to it using a text link to my blog.

This tut is written using a beautiful PTU kit created by DNScraps called Ladybug in the Garden which can be purchased at Scrappetizing.   It was written using PSPX, but is adaptable to any version and is for people with a good working knowledge of PSP.

No outside supplies needed.

Filters used: Mura’s Meister Copies

Open a new image 525 by 625, fill with white. C/P framepattern2 as a new layer. Take the magic wand and click inside the frame, selection/modify/expand 4. Add new raster layer, c/p paper17 into selection. Drag the paper layer under the frame layer. Highlight frame layer, merge down, add drop shadow.

Open brad2 and resize to 15%, c/p as new layer.  Effects/Plugins/Mura’s Meister/Copies and change the drop down on the left of the filter to Encircle, all other dropdowns and sliders remain at default, click ok. Using the deform tool, resize the circle of buttons down to about 25% of the original size. Open brad4, resize to 8%, c/p as new layer. Use Mura’s Meister/Copies again with the same settings as stated above.  Resize with the deform too to about 25% of its original size. Drag both button layers under the frame and duplicate and arrange them as shown in the sample image above. Once you have them positioned how you want them, close the frame layer and bottom white layer, merge visible, add drop shadow.

Open a cottage of your choice, resize to 50%, c/p as new layer somewhere on the bottom right overlapping the frame. Open flowerelegant3, resize to 50%, c/p on the top right of the image, duplicate and move up and to the left slightly. Highlight the top flower layer, merge down.  Drag below the cottage, position how you like it. Open another flowerelegant3, resize to 20%, c/p as a new layer above the cottage.  Duplicate and position these flowers on the left side of the base of the cottage.  Duplicate one of these smaller flower layers again and move it to the bottom right of the cottage, drag the layer below the cottage.  Open ladybugclipart2, resize to 30%, move to the bottom right of the cottage. Open dragonflyribbon2, resize to 20%, c/p as a new layer, position it where you want it.  Duplicate and position the second dragonfly. Feel free to duplicate more if you would like. Add a drop shadow to all the layers of the flowers, cottage and bugs.

Open one of the beautiful cookies supplied with the kit. These cookies are © Medi http://medievilcreations.blogspot.com/ Resize to 30%, c/p as a new layer and position it on the upper left of the image, add a drop shadow.

Close the white bottom layer, merge visible. Open the bottom layer again, crop all excess white background. Before I added my text, I resized the whole image to 91% since I like to make my tags no larger than 500 pixels on the longest size.  That is just personal preference though, don’t feel you have to resize if you don’t want to.

Now you can add your text, watermark and copyright info.  You are done!

I hope you enjoyed this tutorial.

Portrait of Beauty

Portrait of Beauty

This tut was written by me, Em Jay, on April 17, 2010

with all rights reserved.  Please do not copy and paste it in any group or call it your own. You can link to it using a text link to my blog.

This tut is written using a PTU kit created by Bello Scarto called Scrap Angel which can be purchased at Heartbeatz Store.   It was written using PSPX, but is adaptable to any version and is for people with a good working knowledge of PSP.

Supplies needed: A greyscale tube of your choice.

I spent a little time playing around with the different papers in this kit and working different ways to make a background without using any other supplies. Here’s what I came up with this time.

Open a new image 550 by 550, fill with white. Open Bs_sc_paper2 in PSP and minimize it Take the preset shapes tool and set it to rectangle. Anti-alias and Create on vector should be checked, line is solid and width 1.  Set your foreground color to white and background should be set to pattern, scale 50 and pick the paper that is open as the pattern to work with. Now just make some overlapping rectangle shapes covering a major portion of the image.  Move them around and even change the position of the layers until you find an arrangement that you like. Convert to raster layer.

Duplicate this layer, move it up and to the left a bit, lower the opacity to around 45. While this layer is still highlighted, select all, float, defloat, modify/contract 6, modify/select selection border, promote selection to new layer. On this new layer, set the opacity back up to 100, flood fill with a shade of grey from your image, add a nice inner bevel of your choice.

Highlight the bottom layer and add a nice drop shadow. Highlight the duplicated layer and merge down. Highlight the border layer, add a nice drop shadow then merge down.

Using your rectangle preset shape tool again, draw a new rectangle using a shade of grey from your image. C/P Bs_sa_element28 as a new layer.  Highlight the grey rectangle shape layer and resize it using the Object Selection Tool so you have it showing around the frame on all four sides making it look like a nice border around the frame.  Convert this layer to a raster, select all, float, defloat and add a texture effect that you like.  I used blinds twice, once vertical and once horizontal. Add a drop shadow to this layer. Highlight the frame layer, c/p your tube of choice as new layer. I used a beautiful image ©Marlene Freimanis. Resize as necessary so that it’s framed nicely.  You can even use the deform tool to resize the frame to work with the height and width of the tube you are using. Drag the tube layer under the frame, add drop shadow. Highlight the frame, add drop shadow and merge down, then merge down again.

C/P Bs_sa_element31 as a new layer, resize, position and deform the element so that it looks like it’s curving up the right side, add a drop shadow. C/P Bs_sa_element21 as a new layer, duplicate. Resize, rotate and position the duplicated layer up on the left top of the image. Highlight the original element layer and resize and position it on the lower right of the image.  Add a drop shadow to each layer, merge the duplicate layer down.

Open Bs_sa_element33, resize to 30%, Image/Greyscale. C/P on a new layer, duplicate and position, rotate and resize as needed up left by the heart.  Add a drop shadow to each layer. Open Bs_sa_element36, resize to 60%, c/p as new layer and move it up on the right top part of the image.  I had to mirror the bow and rotate it slightly on mine.  You may not have to. Open Bs_sa_37 and resize to 50%, c/p it on the bottom right on top of the heart.

Add your text, watermark and copyright information.  Easy-peasy, you’re done!

Thank you for trying this tut.  I hope you enjoyed it.

Green Goddess

Green Goddess

This tut was written by me, Em Jay, on 4-8-10 with all rights reserved.  Please do not copy and paste it in any group or call it your own. You can link to it using a text link to my blog.

This tut is written using a beautiful PTU kit created by WishingonaStarr called Green Goddess which can be purchased at Scrappetizing.   It was written using PSPX, but is adaptable to any version and is for people with a good working knowledge of PSP.

Supplies: Vix_Mask-404 which can be downloaded from her site here.

Open a new image 550 by 550, fill with white, select all, add , select all, add new raster layer, c/p BonusPaper4 into selection. Open Vix_Mask-404, highlight the BonusPaper4 layer, Layers/New mask layer/from image, scroll the dropdown to the Vix mask, ok.

C/P GreenGoddess-.Frame as new layer. Open GreenGoddess_Poser, resize to 72%, c/p as new layer, position on the left side of the unicorn frame. C/P GreenGoddess_Feather on a new layer, mirror, position on the right of the image, drag this layer below the unicorn frame layer. Open GreenGoddess_Green, resize to 65%, position over the right side of the frame layer, duplicate. Take the freehand selection tool and make a selection of the top three leaves, c/p on new layer. Select none. Position, resize, rotate these leaves where you want them on the right side of the image.  I duplicated the leaves once again and moved them further down on the right side of the frame.  Highlight top layer, merge down twice. Add a nice drop shadow.

Open GreenGoddes_Floral, resize to 65%, c/p as new layer on the top left of the image, duplicate. Drag both layers under the poser, use the deform tool to resize as needed, rotate and position these floral layers so they look good to you. Merge the top floral layer.

C/P GreenGoddess_CagedBird as a new layer, position the top of the cage over the top of the  frame, resize if needed with the deform tool, add a drop shadow. C/P GreenGoddess_HummingBird as a new layer, resize and position with the deform tool. Crop any excess white background space on the tag making sure you do not cut off part of the mask or any element’s drop shadow.

Now it’s time to add the text, watermark, and copyright information. Export as a jpeg and you’re done!